Joint replacement

Knee, hip, shoulder and elbow joint replacement systems, in primary and revision versions, cemented and uncemented. Available sizes, diameters and configurations are confirmed with our sales team.

Portfolio
29 products
Organized in
6 categories
Materials
Polyethylene · Stainless steel · Titanium · Chrome-cobalt
Illustrative image

Knee

6 products

Primary knee systems with posterior stabilization or with preservation of the cruciate ligament, cemented fixation, and their separate components: cobalt-chrome tibial base, tibial inserts and patellar component of ultra-high molecular weight polyethylene.

Comparison

ProductMaterialSizesDesignFixationDimensions
Primary knee system with posterior stabilizationCobalt-chrome femoral and tibial components (ASTM F75); ultra-high molecular weight polyethylene tibial insert and patellar componentFour sizes (small, medium, large and extra large); extra small and extra large-extra large sizes upon requestRear stabilized; complete and open three-compartment systemCemented
Cruciate ligament-sparing primary knee systemCobalt-chrome femoral and tibial components (ASTM F75); ultra-high molecular weight polyethylene tibial insert and patellar componentFour sizes (small, medium, large and extra large); extra small and extra large-extra large sizes upon requestLigament preservation; complete and open three-compartment systemCemented
Cobalt Chromium Knee Tibial ComponentChromium-cobaltFour sizes (small to extra large)Cemented67 to 75 mm mediolateral; 42 to 50 mm anteroposterior
Polyethylene tibial insert with posterior stabilizationUltra high molecular weight polyethyleneFour sizes (small to extra large)Posterior-stabilized67 to 75 mm mediolateral; 42 to 50 mm anteroposterior
Ligament Preserving Polyethylene Tibial InsertUltra high molecular weight polyethyleneFour sizes (small to extra large)Ligament preservation66 to 78 mm mediolateral; 41 to 54 mm anteroposterior
Polyethylene patellar componentUltra high molecular weight polyethyleneCemented
Illustrative image

Primary knee system with posterior stabilization

Complete tricompartmental total knee arthroplasty system, with cemented fixation, with cobalt-chrome femoral and tibial components and polyethylene insert and patellar component.

Technical specifications

Indication
Primary total knee arthroplasty
Design
Rear stabilized; complete and open three-compartment system
Fixation
Cemented
Material
Cobalt-chrome femoral and tibial components (ASTM F75); ultra-high molecular weight polyethylene tibial insert and patellar component
Components
Femoral component, tibial base, tibial insert and patellar component, compatible with each other
Laterality
Right and left femoral component
Sizes
Four sizes (small, medium, large and extra large); extra small and extra large-extra large sizes upon request
Femoral component dimensions
63 to 76 mm mediolateral; 55 to 68 mm anteroposterior
Tibial insert thickness
8 to 20mm

Features

  • Components compatible with each other to replace the articular surface of the knee.
  • Cutting instruments with angular correction in varus/valgus from 2° to 11°.
  • Possibility of minimal incision technique.
Illustrative image

Cruciate ligament-sparing primary knee system

Complete tricompartmental total knee arthroplasty system, with cemented fixation, preserving the posterior cruciate ligament; shares the tibial platform and patellar component with the posterior stabilized version.

Technical specifications

Indication
Primary total knee arthroplasty
Design
Ligament preservation; complete and open three-compartment system
Fixation
Cemented
Material
Cobalt-chrome femoral and tibial components (ASTM F75); ultra-high molecular weight polyethylene tibial insert and patellar component
Components
Femoral component, tibial base, tibial insert and patellar component
Sizes
Four sizes (small, medium, large and extra large); extra small and extra large-extra large sizes upon request
Femoral component dimensions
63 to 77 mm mediolateral; 54 to 67 mm anteroposterior
Tibial insert thickness
8 to 20mm

Features

  • Tibial insert with posterior notch for the cruciate ligament.
  • Right and left laterality in the femoral component.
Illustrative image

Cobalt Chromium Knee Tibial Component

Cemented metal tibial base with conical keel, compatible with posterior stabilized polyethylene and ligament preservation inserts.

Technical specifications

Material
Chromium-cobalt
Fixation
Cemented
Sizes
Four sizes (small to extra large)
Height
45 to 48mm
Dimensions
67 to 75 mm mediolateral; 42 to 50 mm anteroposterior

Features

  • Compatible with both tibial insert designs.
Illustrative image

Polyethylene tibial insert with posterior stabilization

Ultra-high molecular weight polyethylene tibial insert with central post, for the posterior stabilization system.

Technical specifications

Material
Ultra high molecular weight polyethylene
Design
Posterior-stabilized
Thicknesses
8 to 20mm
Sizes
Four sizes (small to extra large)
Dimensions
67 to 75 mm mediolateral; 42 to 50 mm anteroposterior
Illustrative image

Ligament Preserving Polyethylene Tibial Insert

Ultra-high molecular weight polyethylene tibial insert without central post, for the ligament preservation system.

Technical specifications

Material
Ultra high molecular weight polyethylene
Design
Ligament preservation
Thicknesses
8 to 20mm
Sizes
Four sizes (small to extra large)
Dimensions
66 to 78 mm mediolateral; 41 to 54 mm anteroposterior
Illustrative image

Polyethylene patellar component

Ultra-high molecular weight polyethylene cemented patellar component.

Technical specifications

Material
Ultra high molecular weight polyethylene
Fixation
Cemented
Diameters
27, 32 and 35mm; 25mm optional

cemented hip

9 products

Cemented stainless steel femoral stems, cement restrictor, distal centralizer, bipolar head and cemented ultra-high molecular weight polyethylene acetabulums with metal ring.

Comparison

ProductMaterialFixationIndicationTaperSizes
Double Taper Polished Cemented Femoral StemChrome-nickel stainless steel (ASTM F138)CementedPrimary partial or total hip arthroplasty: hip osteoarthritis, post-traumatic osteoarthritis, avascular necrosis of the femoral head, ankylosing spondyloarthritis and hip dysplasia11/13 or 12/14, for interchangeable headFive sizes for each cone; length from 151 to 152 mm
Stainless Steel Cemented Femoral Stem, 12/14 Taper, Ten SizesStainless steel (ASTM F138)Cemented12/145; 6.2; 7.5; 8.7; 10; 11.2; 12.5; 13.7; 15 and 16.2
Stainless steel cemented femoral stem, four sizes, 11/13 or 12/14 taperStainless steel (ASTM F138)Cemented11/13 or 12/147.5; 10; 12.5 and 15
Polyethylene Femoral Cement RestrictorUltra-high molecular weight polyethylene (ASTM F648)
Distal Stem CentralizerPMMA (ASTM F3087)
Stainless steel bipolar head with polyethylene coreStainless steel head (ASTM F139); ultra-high molecular weight polyethylene acetabular coreSits on interchangeable head and secures with locking ringHip osteoarthritis, post-traumatic osteoarthritis, avascular necrosis of the femoral head, sequelae of femoral neck fracture, ankylosing spondyloarthritis and hip dysplasia
Constrained polyethylene cemented acetabulum, 28 mm headUltra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)CementedPrimary or revision total hip arthroplasty: rheumatoid arthritis, osteoarthritis, ankylosing spondyloarthritis, avascular necrosis of the femoral head, sequelae of other procedures and acetabular protrusion
Cemented polyethylene acetabulum, 22, 28 and 32 mm headsUltra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)Cemented
Grooved polyethylene cemented acetabulum, 28 mm headUltra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)Cemented
Illustrative image

Double Taper Polished Cemented Femoral Stem

Cemented stainless steel femoral stem, with a highly polished surface and conical geometry in two planes, with collarless neck and 127° cervicoshaft angle.

Technical specifications

Indication
Primary partial or total hip arthroplasty: hip osteoarthritis, post-traumatic osteoarthritis, avascular necrosis of the femoral head, ankylosing spondyloarthritis and hip dysplasia
Fixation
Cemented
Material
Chrome-nickel stainless steel (ASTM F138)
Neck-shaft angle
127°
Taper
11/13 or 12/14, for interchangeable head
Sizes
Five sizes for each cone; length from 151 to 152 mm
Offset
Four head offsets (short, medium, long and extra long), in standard or extended version

Features

  • Highly polished finish, free of imperfections; does not adhere to the cement layer.
  • Two-plane conical geometry that transfers compression forces to the cement and reduces shear forces.
  • Collarless collar.
  • Depth marks on the neck every 5 mm.
Illustrative image

Stainless Steel Cemented Femoral Stem, 12/14 Taper, Ten Sizes

Cemented stainless steel femoral stem with 12/14 cone, available in ten sizes.

Technical specifications

Fixation
Cemented
Material
Stainless steel (ASTM F138)
Taper
12/14
Sizes
5; 6.2; 7.5; 8.7; 10; 11.2; 12.5; 13.7; 15 and 16.2
Illustrative image

Stainless steel cemented femoral stem, four sizes, 11/13 or 12/14 taper

Cemented stainless steel femoral stem available with 11/13 or 12/14 cone, in four sizes.

Technical specifications

Fixation
Cemented
Material
Stainless steel (ASTM F138)
Taper
11/13 or 12/14
Sizes
7.5; 10; 12.5 and 15
Illustrative image

Polyethylene Femoral Cement Restrictor

Intramedullary polyethylene plug that limits the passage of cement in the femoral canal.

Technical specifications

Material
Ultra-high molecular weight polyethylene (ASTM F648)
Diameters
12.4; 14.4; 16.4; 18.4 and 20.4mm
Illustrative image

Stainless steel bipolar head with polyethylene core

Bipolar head with two concentric joints: a small internal one that protects the polyethylene and a large external one that provides stability in extreme movements.

Technical specifications

Indication
Hip osteoarthritis, post-traumatic osteoarthritis, avascular necrosis of the femoral head, sequelae of femoral neck fracture, ankylosing spondyloarthritis and hip dysplasia
Material
Stainless steel head (ASTM F139); ultra-high molecular weight polyethylene acetabular core
Internal diameter
22mm (external diameter 39 to 45mm) and 28mm (external diameter 47 to 53mm)
Fixation
Sits on interchangeable head and secures with locking ring
Illustrative image

Constrained polyethylene cemented acetabulum, 28 mm head

Ultra-high molecular weight polyethylene cemented acetabulum with head retaining ring, for primary or revision hip arthroplasty.

Technical specifications

Indication
Primary or revision total hip arthroplasty: rheumatoid arthritis, osteoarthritis, ankylosing spondyloarthritis, avascular necrosis of the femoral head, sequelae of other procedures and acetabular protrusion
Fixation
Cemented
Material
Ultra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)
Internal diameter
28mm
External diameter
46 to 64mm

Features

  • Hemispherical profile with radial and longitudinal channels.
  • Peripheral spacers that guarantee a uniform cement layer (2 mm).
  • Metal ring for radiographic control.
  • Polyethylene ring that blocks the head and prevents its movement.
Illustrative image

Cemented polyethylene acetabulum, 22, 28 and 32 mm heads

Cemented ultra-high molecular weight polyethylene acetabulum, available for three head diameters.

Technical specifications

Fixation
Cemented
Material
Ultra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)
Internal and external diameter
22mm: 40 to 44mm; 28mm: 46 to 58mm; 32mm: 44 to 64mm
Illustrative image

Grooved polyethylene cemented acetabulum, 28 mm head

Ultra-high molecular weight polyethylene hemispherical cemented acetabulum with ridged external surface for cement fixation.

Technical specifications

Fixation
Cemented
Material
Ultra-high molecular weight polyethylene (ASTM F648); metal ring (ASTM F138)
Internal diameter
28mm
External diameter
44 to 64mm

Uncemented hip

8 products

cementless titanium alloy femoral stems with porous coating, dual-mobility acetabular component, screw-retained overcups, interchangeable femoral head and stainless steel acetabular screw.

Comparison

ProductMaterialFixationIndicationNeck-shaft angleTaper
Porous Coated Titanium cementless Femoral Stem, 135° NeckTitanium alloy (ASTM F136, Ti-6Al-4V ELI) with titanium plasma spray coating (ASTM F1580)UncementedPrimary cementless total hip arthroplasty135°12/14
Porous-coated titanium cementless femoral stem, 131° neck, two offsetsTitanium alloy (ASTM F136) with titanium plasma spray coating (ASTM F1580)UncementedPrimary cementless total hip arthroplasty131°12/14
Porous Coated Titanium cementless Femoral Stem, 131° Neck, Extended OffsetTitanium alloy (ASTM F136) with titanium plasma spray coating (ASTM F1580)Uncemented131°12/14
Dual mobility cementless acetabular componentStainless steel dome (ASTM F138) with titanium plasma spray coating (ASTM F1580); ultra-high molecular weight polyethylene insertUncemented; press fitPrimary or revision total hip arthroplasty
Stainless steel interchangeable femoral headStainless steel (ASTM F138)
Uncemented screw-retained acetabular component with porous coatingStainless steel overcup (ASTM F138) with titanium coating by plasma projection (ASTM F1580); ultra-high molecular weight polyethylene insert, also available in cross-linked polyethyleneUncemented; additional fixation with acetabular screwsPrimary or revision total hip arthroplasty
Non-cemented multi-hole screw-retained acetabular overcupStainless steel (ASTM F138) with plasma titanium coating (ASTM F1580)Uncemented; fixing with screws
6.5mm Stainless Steel Acetabular ScrewStainless steel (ASTM F138)
Illustrative image

Porous Coated Titanium cementless Femoral Stem, 135° Neck

Uncemented titanium alloy femoral stem with two-plane geometry, plasma titanium coating, 135° neck and no calcar support.

Technical specifications

Indication
Primary cementless total hip arthroplasty
Fixation
Uncemented
Material
Titanium alloy (ASTM F136, Ti-6Al-4V ELI) with titanium plasma spray coating (ASTM F1580)
Neck-shaft angle
135°
Taper
12/14
Sizes
Eleven sizes, from 5 to 17.5; length from 132 to 157 mm
Offset
Four head offsets (short, medium, long and extra long)

Features

  • Proximal anchorage with bone preservation and simple wedge concept.
  • Geometry in two planes for fit and stability in all bone types.
  • Without tracing support.
  • Reduced and rough cone that allows the use of ceramic heads.
  • Neck designed to support load according to ISO 7206-6.
Illustrative image

Porous-coated titanium cementless femoral stem, 131° neck, two offsets

Uncemented titanium alloy femoral stem with 131° neck and two offset versions (standard and extended), with titanium coating by plasma projection.

Technical specifications

Indication
Primary cementless total hip arthroplasty
Fixation
Uncemented
Material
Titanium alloy (ASTM F136) with titanium plasma spray coating (ASTM F1580)
Neck-shaft angle
131°
Taper
12/14
Offset
Standard and extended
Sizes
Eleven sizes, from 5 to 17.5; length from 129 to 154 mm

Features

  • Geometry in two planes.
  • Without tracing support.
  • Designed to withstand load according to ISO 7206-6.
Illustrative image

Porous Coated Titanium cementless Femoral Stem, 131° Neck, Extended Offset

Extended offset version of the 131° cementless stem, with wider proximal body and plasma-blasted titanium coating.

Technical specifications

Fixation
Uncemented
Material
Titanium alloy (ASTM F136) with titanium plasma spray coating (ASTM F1580)
Neck-shaft angle
131°
Taper
12/14
Offset
Extended
Illustrative image

Dual mobility cementless acetabular component

Dual mobility acetabular set: metal dome with porous coating, polyethylene insert and interchangeable femoral head that articulates within the insert.

Technical specifications

Indication
Primary or revision total hip arthroplasty
Fixation
Uncemented; press fit
Material
Stainless steel dome (ASTM F138) with titanium plasma spray coating (ASTM F1580); ultra-high molecular weight polyethylene insert
Dome diameter
44 to 70mm
head diameter
22 mm (44 to 48 mm domes) and 28 mm (44 to 70 mm domes)
Components
Metal dome, polyethylene insert and femoral head

Features

  • Hemispherical contour with reduced roof, for an optimal contact area and fixation.
  • Radial and longitudinal channels that promote mechanical engagement and immediate stability.
  • Allows the physiological transfer of efforts.
Uncemented hipPhotograph available on request

Stainless steel interchangeable femoral head

Modular stainless steel femoral head for stems with 11/13 or 12/14 taper.

Technical specifications

Material
Stainless steel (ASTM F138)
Diameters
22, 28 and 32 mm with 11/13 cone; 22, 28, 32 and 36 mm with 12/14 cone
Neck length
Short, medium and long (extra long on 12/14 taper)
Illustrative image

Uncemented screw-retained acetabular component with porous coating

Screwed hemispherical metal overcup, with titanium coating by plasma projection, polyethylene insert and interchangeable head.

Technical specifications

Indication
Primary or revision total hip arthroplasty
Fixation
Uncemented; additional fixation with acetabular screws
Material
Stainless steel overcup (ASTM F138) with titanium coating by plasma projection (ASTM F1580); ultra-high molecular weight polyethylene insert, also available in cross-linked polyethylene
Overcup diameter
45 to 70mm
head diameter
22, 28, 32 and 36 mm (36 mm only with reticulated insert)
Components
Overcup, polyethylene insert, acetabular screws and femoral head

Features

  • At least two fixing screws are recommended.
  • Insert with teeth for anchoring to the overcup.
Illustrative image

Non-cemented multi-hole screw-retained acetabular overcup

Metal overcup with multiple screw holes and titanium coating by plasma projection, for additional fixation with screws.

Technical specifications

Fixation
Uncemented; fixing with screws
Material
Stainless steel (ASTM F138) with plasma titanium coating (ASTM F1580)
Diameter and holes
50mm with 8 holes; 52 to 60 mm with 10 holes; 62 and 64 mm with 12 holes; 66 to 70 mm with 14 holes
Uncemented hipPhotograph available on request

6.5mm Stainless Steel Acetabular Screw

Additional fixation screw for screw-retained acetabular overcups.

Technical specifications

Material
Stainless steel (ASTM F138)
Diameter
6.5mm
Lengths
15 to 40mm

revision hip

2 products

12/14 taper titanium cementless revision stem and acetabular revision prosthesis with ischial bone replacement and anti-rotational edge.

Illustrative image

Titanium cementless Revision Stem, Long, 12/14 Taper

Long cementless hip revision stem, made of titanium with plasma spray coating, in six sizes from 190 to 240 mm.

Technical specifications

Indication
Revision of cementless hip
Fixation
Uncemented
Material
Plasma Spray Titanium Coated Titanium (ASTM F1580)
Taper
12/14
Neck-shaft angle
135°
Length
190, 200, 210, 220, 230 and 240 mm (sizes 0 to 5)

Features

  • Long, straight body with porous coating along its entire length.
Illustrative image

Acetabular revision prosthesis with ischial bone replacement and anti-rotational rim

Solution for bone replacement in the ischium region; It allows fixing the remaining portion of the iliac bone using an anti-rotational edge and reconstructing hip movements.

Technical specifications

Indication
Acetabular revision with bone loss in the ischium region
Fixation
Fixation to the remaining iliac bone with anti-rotational edge

Shoulder

3 products

Modular humeral stem for proximal humerus fracture, stainless steel eccentric humeral head and ultra-high molecular weight polyethylene glenoid component.

Illustrative image

Modular humeral stem for proximal humerus fracture

Humeral stem for reconstruction of the proximal end of the humerus in severe fractures, with V-shaped wings for anatomical placement of the tubercles and more stable osteosynthesis.

Technical specifications

Indication
Reconstruction of the proximal end of the humerus in severe fractures
Design
Modular and eccentric head; fins at 45° in V; engraved depth scale
Diameters and length
7, 9 and 11 mm by 115 mm; 7mm by 80mm version
Neck angle
Varus 128° or valgus 135°
Centralizer
Ultra-high molecular weight polyethylene

Features

  • Anatomical positioning of the tubercles to improve rotator cuff function.
  • Modular and eccentric head.
ShoulderPhotograph available on request

Stainless Steel Eccentric Modular Humeral Head

Offset eccentric humeral head, with short or long neck, for the modular humeral stem.

Technical specifications

Material
Stainless steel (ASTM F138)
Diameter
38 to 50mm
Neck
Short (40% of the circle) or long (50% of the circle)
ShoulderPhotograph available on request

Polyethylene glenoid component

Ultra-high molecular weight polyethylene glenoids for shoulder prostheses.

Technical specifications

Material
Ultra high molecular weight polyethylene
Sizes
Small, medium and large

Elbow

1 product

Locked total elbow prosthesis, anatomical and intramedullary, with cemented fixation with acrylic bone cement.

Illustrative image

Intramedullary anatomical locked total elbow prosthesis

Locked elbow prosthesis system with two intramedullary stems, humeral and ulnar, fixed with acrylic bone cement.

Technical specifications

Indication
Total elbow arthroplasty
Fixation
Cemented with acrylic bone cement
Design
Anatomically locked with two intramedullary stems (humerus and ulna)
Laterality
Right or left side
Sizes
Small, medium and large

Technical consultation

Can't find the reference you are looking for?

Tell us what you need and our team responds with options and technical documentation.

Consult about joint replacements

Other specialties

Illustrative image

ATHENAS MEDICAL GROUP

Privacy and information

This site presents the commercial portfolio of Athenas Medical Group, C.A. It does not use analytical tools or advertising cookies.

The form prepares a message in your browser. By continuing, WhatsApp opens with the data you entered; Shipping is only made when you confirm it on WhatsApp. We do not store these fields in a site database.

WhatsApp, the mapping service and the hosting provider process information according to their own policies. The accommodation may register technical access data.

Avoid sharing patient data or sensitive clinical information. For inquiries about your data, write to athenasmedical@athenasmgrp.com.

Information aimed at health professionals. The selection and use of the devices corresponds to the specialist, according to the applicable technical documentation.

The images are for reference. Confirm configurations, documentation and availability with our team.